12xGiga @ 8xPoE+, 2x SFP + 2xGb -40...+75C Industrial Switch SNMP, IP30

Tekniset tiedot:
  8x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE
802.3at/af PoE+ Injector function(Ports 1 to 8)
  2x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports (Ports 9
to 10)
  2x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto
detection (Ports 11 to 12)
  1x RJ45 console interface for basic management and setup
  Complies with IEEE 802.3at Power over Ethernet Plus, end-
span PSE
  Backward compatible with IEEE 802.3af Power over Ethernet
  Up to 8 ports of IEEE 802.3af/802.3at devices powered
  240W PoE budget
  Supports PoE power up to 36 watts for each PoE port
  Auto detects powered device (PD)
  Circuit protection prevents power interference between
ports
  Remote power feeding up to 100 meters in standard mode and
250m in extend mode
  PoE management
  Total PoE power budget control
  Per port PoE function enable/disable
  PoE port power feeding priority
  Per PoE port power limitation
  PD classification detection
  Intelligent PoE features
  PD alive check
  PoE schedule
  Industrial Case and Installation
  IP30 aluminum case
  DIN rail and wall-mount design
  48...54VDC, redundant power with reverse polarity
protection
  Supports 6000VDC Ethernet ESD protection
  -40...+75C operating temperature
  Hardware-based 10/100Mbps (half/full duplex), 1000Mbps
(full duplex), auto-negotiation and auto MDI/MDI-X
  IEEE 802.3x flow control for full duplex operation and
back pressure for half duplex operation
  8k MAC address table size
  10k jumbo frame
  Automatic address learning and address aging
  Supports VLAN
  IEEE 802.1Q tagged VLAN
  Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
  Protocol VLAN
  Voice VLAN
  Private VLAN (Protected port)
  Management VLAN
  GVRP
  Supports Spanning Tree Protocol
  STP (Spanning Tree Protocol)
  RSTP (Rapid Spanning Tree Protocol)
  MSTP (Multiple Spanning Tree Protocol)
  STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  Supports Link Aggregation
  IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  Cisco ether-channel (static trunk)
  Maximum 6 trunk groups, up to 8 ports per trunk group
  Provides port mirror (many-to-1)
  Loop protection to avoid broadcast loops
  Supports ERPS (Ethernet Ring Protection Switching)
  Link Layer Discovery Protocol (LLDP)
  Quality of Service
  Ingress/Egress Rate Limit per port bandwidth control
  Traffic classification
  IEEE 802.1p CoS
  TOS/DSCP/IP precedence of IPv4/IPv6 packets
  Strict priority and Weighted Round Robin (WRR) CoS
policies
  Multicast
  Supports IPv4 IGMP snooping v2, v3
  Supports IPv6 MLD snooping v1, v2
  IGMP querier mode support
  IGMP snooping port filtering
  MLD snooping port filtering
  Security
  Storm Control support
  Broadcast/ unknown multicast/unknown unicast
  Authentication
  IEEE 802.1X port-based network access authentication
  Built-in RADIUS client to cooperate with the RADIUS
servers
  DHCP Option 82
  RADIUS/TACACS+ authentication
  Access Control List
  IPv4/IPv6 IP-based ACL
  IPv4/IPv6 IP-based ACE
  MAC-based ACL
  MAC-based ACE
  MAC Security
  Static MAC
  MAC filtering
  Port security for source MAC address entries filtering
  DHCP snooping to filter distrusted DHCP messages
  Dynamic ARP inspection discards ARP packets with invalid
  MAC address to IP address binding
  IP source guard prevents IP spoofing attacks
  DoS attack prevention
  Management
  IPv4 and IPv6 dual stack management
  Switch Management Interface
  Web switch management
  Console/Telnet Command Line Interface
  SNMP v1 and v2c switch management
  SSHv2, TLSv1.2 and SNMP v3 secure access
  SNMP Management
  SNMP trap for interface Link Up and Link Down notification
  Four RMON groups (history, statistics, alarms and events)
  User privilege levels control
  Built-in Trivial File Transfer Protocol (TFTP) client
  Static and DHCP for IP address assignment
  System Maintenance
  Firmware upload/download via HTTP/TFTP
  Configuration upload/download through HTTP/TFTP
  Dual images
  Hardware reset button for system reboot or reset to
factory default
  SNTP Network Time Protocol
  Network Diagnostic
  Cable diagnostics
  ICMPv6/ICMPv4 Remote Ping
  SFP-DDM (Digital Diagnostic Monitor)
  Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  Event message logging to remote syslog server
  PLANET Smart Discovery Utility for deployment management
  PLANET NMS system and CloudViewer for deployment
management