8x100/1000T PoE++ +2x10G SFP, -40...+75C Industrial Switch, SNMP, L3, IP30

Tekniset tiedot
  8x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with
802.3bt PoE++ Injector function
  2x 100/1000BASE-X SFP slots for SFP type auto detection
  2x 10GBASE-SR/LR SFP+ slots, compatible with
1000/2500BASE-X
SFP
  One RJ45-to-RS232 console interface for basic management
and setup
  Dual power input, redundant power with reverse polarity
protection
- DC 48 to 56V input
- Active-active redundant power failure protection
- Backup of catastrophic power failure on one supply
- Fault tolerance and resilience
  DIN-rail and wall-mountable design
  IP30 aluminum case
  Supports 6000V DC Ethernet ESD protection
  -40...+75C operating temperature
  2x Digital Input (DI)
  2x Digital Output (DO)
  Integrate sensors into auto alarm system
  Transfer alarm to IP network via email and SNMP trap
  Complies with IEEE 802.3bt Power over Ethernet Plus Plus
Type-4 PSE
  Backward compatible with IEEE 802.3at/af PD device
  Up to 8 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt
PoE++ devices powered
  Supports PoE power up to 95 watts for each PoE port
  Total of 360-watt PoE budget
  Auto detects powered device (PD)
  Circuit protection prevents power interference between
ports
  Remote power feeding up to 100m
  PoE management features
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE admin-mode control
- PoE port power feeding priority
- Per PoE port power limit
- PD classification detection
- PoE extend mode control to support power feeding up to a
distance of up to 160 meters
  Intelligent PoE features
- Temperature threshold control
- PoE usage threshold control
- PD alive check
- PoE schedule
  IP dynamic routing protocol supports OSPFv2
  IPv4/IPv6 hardware static routing
  Routing interface provides per VLAN routing mode
  High performance of Store-and-Forward architecture, and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
  Storm Control support
- Broadcast/Multicast/Unicast
  Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095 VLAN IDs
- Supports provider bridging (VLAN Q-in-Q IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
- GVRP (GARP VLAN Registration Protocol)
  Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
- BPDU Guard
  Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 4 trunk groups with 4 ports per trunk group
- Up to 40Gbps bandwidth (duplex mode)
  Provides port mirror (many-to-1)
  Port mirroring to monitor the incoming or outgoing traffic
on a particular port
  Loop protection to avoid broadcast loops
  Link Layer Discovery Protocol (LLDP)
  Compatible with Cisco uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any
point between the two devices
  Supports G.8032 ERPS (Ethernet Ring Protection Switching)
  IEEE 1588 and Synchronous Ethernet network timing
  Ingress Shaper and Egress Rate Limit per port bandwidth
control
  8x priority queues on all switch ports
  Traffic classification
- IEEE 802.1p CoS
- IP TOS/DSCP/IP precedence
- IP TCP/UDP port number
- Typical network application
  Strict priority and Weighted Round Robin (WRR) CoS
policies
  Supports QoS and In/Out bandwidth control on each port
  Traffic-policing on the switch port
  DSCP remarking
  Supports IPv4 IGMP snooping v1, v2 and v3
  Supports IPv6 MLD snooping v1 and v2
  Querier mode support
  IPv4 IGMP snooping port filtering
  IPv6 MLD snooping port filtering
  MVR (Multicast VLAN Registration)
  Authentication
- IEEE 802.1X Port-based/MAC-based network access
authentication
- Built-in RADIUS client to cooperate with the RADIUS
servers
- TACACS+ login users access authentication
- RADIUS/TACACS+ users access authentication
- Guest VLAN assigns clients to a restricted VLAN with
limited services
  Access Control List
- IP-based Access Control List (ACL)
- MAC-based Access Control List
  Source MAC/IP address binding
  DHCP snooping to filter distrusted DHCP messages
  Dynamic ARP Inspection discards ARP packets with invalid
  MAC address to IP address binding
  IP Source Guard prevents IP spoofing attacks
  IP address access management to prevent unauthorized
intruder
  IPv4 and IPv6 dual stack management
  Switch Management Interfaces
- Console and Telnet Command Line Interface
- HTTP web switch management
- SNMP v1 and v2c switch management
- SSH, TLS, SSL and SNMP v3 secure access
  SNMP Management
- Four RMON groups (history, statistics, alarms, and events)
- SNMP trap for interface Link Up and Link Down notification
  IPv6 IP address/NTP/DNS management
  Built-in Trivial File Transfer Protocol (TFTP) client
  BOOTP and DHCP for IP address assignment
  System Maintenance
- Firmware upload/download via HTTP/TFTP
- Reset button for system reboot or reset to factory default
- Dual Images
  DHCP Relay
  DHCP Option 82
  DHCP Server
  User Privilege levels control
  Network Time Protocol (NTP)
  Network Diagnostic
  System Maintenance
- SFP-DDM (Digital Diagnostic Monitor)
- Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
- ICMPv6/ICMPv4 remote ping
  SMTP/Syslog remote alarm
  System Log
  PLANET Smart Discovery Utility for deployment management