8xGiga 4x PoE+ -40...+75C Managed Industrial Switch, Flat
- Valmistajan koodi : WGS-804HPT
- EAN : 4711605281720
202,80 €
Leasing/vuokraus:7,01 €/kk ALV 0%, kun sopimusaika on 36 kk.
Tuotteen kuvaus
- Valmistajan koodi : WGS-804HPT
- EAN : 4711605281720
- Tuotteen nimi : 8xGiga 4x PoE+ -40...+75C Managed Industrial Switch, Flat
PLANET WGS-804HPT on teollisuuskäyttöön suunniteltu
hallittava 8-porttinen 10/100/1000 Ethernet-kytkin, jonka
Ethernet-porteista 4x on varustettu PoE+ virransyöttötuella.
Kytkin on varustettu laajennetulla käyttölämpötila-alueella
(-40...+85C).
WGS-804HPT on rakenteeltaan matala-tyyppinen ("flat"), joten
sen seinäasennus on vaivatonta. Laitteessa on myös DIN- sekä
magneettikiinnitys mahdollisuudet, joten se saadaan
asennettua kaikentyyppisiin koteloihin.
Tekniset tiedot:
• 8x 10/100/1000BASE-T Gigabit RJ45 copper with 4-ort IEEE
802.3at/af PoE Injector (Port-1 to Port-4)
• Complies with IEEE 802.3at Power over Ethernet Plus, end-
span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 4 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE power up to 36 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100 meters
• PoE management
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE port power feeding priority
- Per PoE port power limitation
- PD classification detection
- PD alive check
- PoE schedule
• Compact size, wall-mounted, magnetic wall mount and DIN-
rail design
• IP30 metal case protection
• Supports -40...+75C operating temperature
• Supports ESD 8KV DC Ethernet protection
• 48...56VDC wide power input
• Hardware based 10/100Mbps, half/full duplex and 1000Mbps
full duplex mode, flow control and auto-negotiation and auto
MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering
and forwarding rates
• IEEE 802.3x flow control for full duplex operation and
back pressure for half duplex operation
• 8K MAC address table size
• 10K jumbo frame
• Automatic address learning and address aging
• Supports CSMA/CD protocol
• Supports VLAN
- IEEE 802.1Q tagged VLAN
- Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
- Protocol VLAN
- Voice VLAN
- Private VLAN (Protected port)
- Management VLAN
- GVRP
• Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol)
- RSTP (Rapid Spanning Tree Protocol)
- MSTP (Multiple Spanning Tree Protocol)
- STP BPDU Guard, BPDU Filtering and BPDU Forwarding
• Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 4 trunk groups, up to 4 ports per trunk group
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops
• Ingress/Egress Rate Limit per port bandwidth control
• Traffic classification
- IEEE 802.1p CoS
- TOS/DSCP/IP precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports IPv4 IGMP snooping v2, v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering
• Storm Control support
- Broadcast/Unknown unicast/Unknown multicast
• Authentication
- IEEE 802.1X port-based network access authentication
- Built-in RADIUS client to co-operate with the RADIUS
servers
- DHCP Option 82
- RADIUS/TACACS+ authentication
• Access Control List
- IPv4/IPv6 IP-based ACL
- IPv4/IPv6 IP-based ACE
- MAC-based ACL
- MAC-based ACE
• MAC Security
- Static MAC
- MAC filtering
• Port security for source MAC address entries filtering
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP inspection discards ARP packets with invalid
MAC address to IP address binding
• IP source guard prevents IP spoofing attacks
• DoS attack prevention
• SSH/SSL
• IPv4 and IPv6 dual stack management
• Switch Management Interface
- IPv4/IPv6 Web switch management
- Telnet Command Line Interface
- SNMP v1, v2c, v3
- SSH and SSL secure access
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• Static and DHCP for IP address assignment
• System Maintenance
- Firmware upload/download via HTTP / TFTP
- Configuration upload/download through HTTP / TFTP
- Hardware reset button for system reboot or reset to
factory default
• SNTP Network Time Protocol
• Cable diagnostics
• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
• SNMP trap for interface Link-up and Link-down notification
• Event message logging to remote Syslog server
• Four RMON groups (history, statistics, alarms and events)
• PLANET Smart Discovery Utility