• Jatka kassalle


Tuotekoodi: 19616  Valmistajan koodi: NOC#NT-H1  EAN: 4716123312680 


Kuvassa esiintyvä tuote saattaa poiketa tarjotusta tai sisältää ylimääräisiä tuotteita


Noctua NT-H1 Pro-grade Thermal Grease

Heti myymälässä : 1
Verkkokaupan varastossa : 26
Toimitusaika-arvio : Heti

11,00 €

Hinta 1 kpl



Korissa: 0 kpl

Toimituskulut alk: 2,99 €

Noctuan tehokas lämpötahna.

Takuuaika: 24 kk

Takuutapauksissa ole yhteydessä ensisijaisesti jälleenmyyjään saadaksesi lisätietoa takuu- tai huoltokorjausvaihtoehdoista.

Noctua´s NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional performance and maximum ease of use: A hybrid compound of different micro-particles allows for minimum thermal resistance, excellent ease of use and outstanding long-term stability.
Excellent performance

NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimized for use in PC environments. Thanks to its extremely low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.

Maximum ease of use & efficient dosage
As NT-H1 spreads very well under pressure, there´s no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that´s it!

Top-performance right from the start
NT-H1 reaches its full performance extremely fast and doesn´t require a longer "burn-in" time.

Excellent long-term stability
NT-H1 doesn´t contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound´s exceptional curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.

Not electrically conductive, non-corroding
NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there´s no danger of short-circuits even in case of direct contact with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and copper coolers.

Suitable for compressor cooling
NT-H1 is perfectly suited for use with compressor coolers. Even at the very lowest temperatures, the paste delivers full performance and remains easy to clean off.

Noctua´s NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional performance and maximum ease of use: A hybrid compound of different micro-particles allows for minimum thermal resistance, excellent ease of use and outstanding long-term stability.
Excellent performance

NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimized for use in PC environments. Thanks to its extremely low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.

Maximum ease of use & efficient dosage
As NT-H1 spreads very well under pressure, there´s no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that´s it!

Top-performance right from the start
NT-H1 reaches its full performance extremely fast and doesn´t require a longer "burn-in" time.

Excellent long-term stability
NT-H1 doesn´t contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound´s exceptional curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.

Not electrically conductive, non-corroding
NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there´s no danger of short-circuits even in case of direct contact with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and copper coolers.

Suitable for compressor cooling
NT-H1 is perfectly suited for use with compressor coolers. Even at the very lowest temperatures, the paste delivers full performance and remains easy to clean off.

Hankinnat

Saatavilla on erilaisia rahoitusvaihtoehtoja asiakkaiden tarpeisiin, sekä yrityksille, yhteisöille ja henkilöasiakkaille.

Tämän laitteen kohdalla rahoitusvaihtoehdot olisivat:
Kuluttajille
Kuluttajille saatavilla rahoitusvaihtoehtoja, Svealta, Joustolta ja Everydayltä. Tarkemmat osamaksuehdot löydät, kun teet tilauksen haluamillesi tuotteille. Jokaisessa kulutusluotossa voi olla omia kampanjoita, esim. 3 kk korotonta maksuaikaa, jolloin voit maksaa laskun kolmessa erässä, ilman lisäkustannuksia.
Leasing

Leasingrahoitus on tarkoitettu vain yhteisöille ja yrityksille. Leasingsopimuksen etuja.

  • Säästät veroissa, koska leasinghankinnat voidaan vähentää täysimääräisinä verotuksessasi.
  • Säästät käteisvaroja muihin tarpeisiin etkä ole sidottu tuotteisiin pysyvästi.
  • Oma pääoma ei kärsi suurista kertahankinnoista.
  • Voit sijoittaa hankintoihin suunnitellut rahat itse liiketoimintaan, missä ne tuottavat paremmin.
  • Tiedät jo etukäteen kiinteät kulut sopimuksen laitteista ja voit budjetoida tehokkaammin.
  • Saat takuuvarmasti nopean luottopäätöksen ja hankinta on helppoa
  • Tarjoamme joustavuutta sopimuksissa. Halutessasi voit jopa vaihtaa leasing laitteita uudempiin sopimuskauden aikana.