Langaton 433M vastaanotin / releohjaus 10A

KAM-136 on 433MHz langattomalla taajuudella toimiva
vastaanotin releohjauksella. Vastaanottimeen voidaan
parittaa 433MHz taajuudella toimivia antureita ja kauko-
ohjaimia, joiden liipaisemana vastaanottimen relettä saadaan
ohjattua.

Tekniset tiedot:
• Input Voltage: 12VCD
• RF working mode: Superheterodyne
• Receiver sensitivity: >97 dBm
• Transmitting distance: >100m ( open space)
• Decoding mode: MCU software decoding
• Remote storage: 20x
• Support remote type: EV1527 learning code
• Working mode: Momentary, toggle, latching time delay (5s,
10s, 15s)
• Output terminal: NO, NC, COM

• Inching learning method:
Press the code pairing button on the control panel once, and
the LED indicator will flash once. After the LED
indicatorlit, press the button you need to pairing on the
remote control, the LED indicator on the control panel will
flash for 3 times which means the pairing succeed.

• Self-locking learning method:
Press the code pairing button on the control panel twice,
and the LED indicator will flash twice. After the LED
indicatorlit, press the button you need to pairing on the
remote control, the LED indicator on the control panel will
flash for 3 times which means the pairing succeed.

• Mutual lock learning method:
Press the code pairing button on the control panel three
times, and the LED indicator will flash three times. After
the LED indicatorlit, press the button you need to pairing
on the remote control, the LED indicator on the control
panel will flash for 3 times which means the pairing
succeed.

• 5S delay learning method:
Press the code pairing button on the control panel four
times, and the LED indicator will flash four times. After
the LED indicatorlit, press the button you need to pairing
on the remote control, the LED indicator on the control
panel will flash for 3 times which means the pairing
succeed.

• 10S delay learning method:
Press the code pairing button on the control panel five
times, and the LED indicator will flash five times. After
the LED indicatorlit, press the button you need to pairing
on the remote control, the LED indicator on the control
panel will flash for 3 times which means the pairing
succeed.

• 15S delay learning method:
Press the code pairing button on the control panel six
times, and the LED indicator will flash six times. After the
LED indicatorlit, press the button you need to pairing on
the remote control, the LED indicator on the control panel
will flash for 3 times which means the pairing succeed.

• Clearing the code :
Push the learning button on the receiver 8 secs, the codes
will be reset. After clearing the code, remotes will be need