Teltonika RUT301 Ethernet Router

Teltonika RUT301 on teollinen Ethernet- reititin, joka on suunniteltu tehokkaaseen IoT-alan laitteiden liittämiseen. Tämä edullinen reititin tarjoaa luotettavan ja vankan verkkoyhteyden edistyneillä suojausominaisuuksilla. Viisi Ethernet-porttia, kaksi konfiguroitavaa digitaalista tuloa/lähtöä ja USB 2.0 -porttia sisältävä Teltonika RUT301 -reititin sopii erinomaisesti teollisuuslaitteiden, yritysteknologian tai vähittäiskaupan järjestelmien liittämiseen. Lisäksi RUT301:ssä on esikonfiguroitu palomuuri ja se tukee laajaa valikoimaa teollisia viestintäprotokollia , mikä tekee siitä helpon integroinnin eri ympäristöihin.

Tämä ammattimainen laite on varustettu RutOS-järjestelmällä . RutOS on Linux OpenWRT:hen perustuva käyttöjärjestelmä, joka on Teltonika -reitittimien valikoiman suuri etu .

Toinen etu on RMS - toimintojen käyttö . Remote Management System (RMS) mahdollistaa kaikkien Teltonikan verkkolaitteiden etähallinnan ja -valvonnan . Järjestelmän avulla voit muuttaa asetuksia ja kerätä tietoja yksittäisten laitteiden tilasta, vaikka laitteilla ei olisi julkisia IP-osoitteita.

Teltonika RUT300 -reititin  tarjoaa myös  yhteyden IoT-RMS-pilvialustaan. Tämän järjestelmän avulla voit etähallita ja konfiguroida paitsi laitettasi myös koko ratkaisuinfrastruktuuria RMS CONNECTin avulla.

Ominaisuudet:
• 5 x Ethernet-porttia, 2 x konfiguroitavaa digitaalista tuloa/lähtöä ja USB-portti eri laitteiden helppoon liittämiseen Internetiin
• Esikonfiguroitu palomuuri välittömään tietoturvaan ja parhaisiin VPN-verkkoihin
• Passiivinen PoE auttaa vähentämään käyttöönoton monimutkaisuutta
• RutOS ja etäkäyttö hallintajärjestelmän (RMS) tuki
• Tukeva alumiinikotelo DIN-kiskoon kiinnitysvaihtoehdolla
• Mitat: 100 x 30 x 85 mm
• Paino: 233 g
• Sisääntulosuojausluokitus: IP30

Vakiopaketti sisältää:
• RUT301-reititin
• Virtalähde 9 W Euro PSU
• Ethernet-kaapeli (pituus 1,5 m)
• Käyttöopas
• RMS-lehtinen

Ethernet
WAN
1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX

LAN
4 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Network
Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN

VoIP passthrough support
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall
Port forward, traffic rules, custom rules, TTL target customisation

Firewall status page
View all your Firewall statistics, rules, and rule counters

Port management
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on

Network topology
Visual representation of your network, showing which devices are connected to which other devices

DHCP
Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS
Supported >77 service providers, others can be configured manually

DNS over HTTPS
DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS

Network backup
VRRP, Wired options, each of which can be used as an automatic Failover

Load balancing
Balance Internet traffic over multiple WAN connections

Hotspot
Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

SSHFS
Possibility to mount remote file system via SSH protocol

Traffic Management
Real-time monitoring, wireless signal charts, traffic usage history

Security
Authentication
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator

Firewall
Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64

Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN
Port and tag-based VLAN separation

WEB filter
Block list for blocking out unwanted websites, allow list for specifying allowed sites only

Access control
Flexible access control of SSH, Web interface, CLI and Telnet

Certificate Manager
Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates

802.1x
Port-based network access control server

VPN
OpenVPN
Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,

BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

IPsec
XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE
GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN
Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support

SSTP
SSTP client instance support

ZeroTier
ZeroTier VPN client support

WireGuard
WireGuard VPN client and server support

Tinc
Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.

OPC UA
Supported modes
Client, Server

Supported connection types
TCP

MQTT Gateway
Modbus MQTT Gateway
Allows sending commands and receiving data from MODBUS Server through MQTT broker

MODBUS
Supported modes
Server, Client

Supported connection types
TCP, USB

Custom registers
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality

Supported data formats
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Data to Server
Protocol
HTTP(S), MQTT, Azure MQTT

Data to server
Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature

DNP3
Supported modes
Station, Outstation

Supported connection
TCP, USB

DLMS/COSEM
DLMS Support
DLMS - standard protocol for utility meter data exchange

Supported modes
Client

Supported connection types
TCP, USB

API
Teltonika Networks Web API (beta) support
Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

Monitoring & Management
WEB UI
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status

FOTA
Firmware update from server, automatic notification

SSH
SSH (v1, v2)

TR-069
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT
MQTT Broker, MQTT publisher

SNMP
SNMP (v1, v2, v3), SNMP Trap, Brute force protection

JSON-RPC
Management API over HTTP/HTTPS

RMS
Teltonika Remote Management System (RMS)

IoT Platforms
Cumulocity - Cloud of Things
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP. Has reboot and firmware upgrade actions

Azure IoT Hub
Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs

System Characteristics
CPU
Mediatek, 580 MHz, MIPS 24KEc

RAM
128 MB, DDR2

FLASH storage
16 MB serial NOR flash

Firmware/Configuration
WEB UI
Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA
Update FW

RMS
Update FW/configuration for multiple devices at once

Keep settings
Update FW without losing current configuration

Factory settings reset
A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration

FIRMWARE CUSTOMISATION
Operating system
RutOS (OpenWrt based Linux OS)

Supported languages
Busybox shell, Lua, C, C++

Development tools
SDK package with build environment provided

GPL customization
You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs

Package Manager
The Package Manager is a service used to install additional software on the device

USB
Data rate
USB 2.0

Applications
Samba share, USB-to-serial

External devices
Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter

Storage formats
FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4

Input/Output
Input
Up to 2 x Configurable digital Inputs (shared), 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

Output
Up to 2 x Configurable digital Outputs (shared), Open collector output, max output 30 V, 300 mA

Events
Email, RMS

I/O juggler
Allows to set certain I/O conditions to initiate event

Power
Connector
4-pin industrial DC power socket

Input voltage range
9 - 30 VDC, reverse polarity protection, voltage surge/transient protection

PoE (passive)
Passive PoE (Optional - different hardware required; contact your sales manager)

Power consumption
Idle: < 0.8 W, Max: < 3.8 W

Physical Interfaces
Ethernet
5 x RJ45 ports, 10/100 Mbps

I/O’s
2 x Configurable digital I/O on 4-pin power connector

Status LEDs
1 x WAN type LED, 4 x LAN status LEDs, 1 x Power LED

Power
1 x 4-pin power connector

USB
1 x USB A port for external devices

Reset
Reboot/User default reset/Factory reset button

Physical Specification
Casing material
Aluminium housing

Dimensions (W x H x D)
100 x 30 x 85 mm

Weight
233 g

Mounting options
DIN rail, wall mount, flat surface (all require additional kit)

Operating Environment
Operating temperature
-40 °C to 75 °C

Operating humidity
10% to 90% non-condensing

Ingress Protection Rating
IP30

Regulatory & Type Approvals
Regulatory
Giteki, RoHS, REACH, CE, FCC, IC, RCM, CB

EMC Emissions & Immunity
Standards
EN 55032: 2015+A11:2020+A1:2020

EN 61000-3-3: 2013+ A1:2019+A2:2021

EN IEC 61000-3-2: 2019+A1:2021

EN 55035: 2017+A11:2020

ESD
EN 61000-4-2:2009

Radiated Immunity
EN IEC 61000-4-3:2020

EFT
EN 61000-4-4: 2012

Surge Immunity (AC Mains Power Port)
EN 61000-4-5: 2014+A1: 2017

CS
EN 61000-4-6:2014

DIP
EN IEC 61000-4-11:2020

Safety
Standards
RCM: AS/NZS 62368.1:2018

CB: IEC 62368-1:2018

Safety (Ordinary Locations)
Standards
CB: IEC 62368-1:2018

UL/CSA Safety: