Planet Industrial IGS-10020HPT 8xGiga PoE+ 2xSFP, -40...+75C Industrial Switch SNMP, IP30

PLANET IGS-10020HPT on teollisuuskäyttöön soveltuva 10- 
porttinen hallittava 10/100/1000 (8x TX + 2x SFP) High PoE 
Ethernet- kytkin laajennetulla käyttölämpötila-alueella 
sekä DIN-kiskokiinnityksellä. 

Kytkin on varustettu "PD keep-alive" ominaisuudella, jolla 
kytkin pystyy itsenäisesti tarkistamaan esim. IP-kameran 
tilan ping-komennolla ja tekemään portille automaattisen 
virtakäynnistyksen (PoE OFF -> PoE ON). 

Tekniset tiedot: 
8x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE
802.3at PoE+ Injector 
2x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto 
detection 
One RJ45 console interface for basic management and setup 
Complies with IEEE 802.3at Power over Ethernet Plus/end- 
span PSE 
Up to 8 IEEE 802.3af/802.3at devices powered 
Supports PoE power up to 36 watts for each PoE port 
Auto detects powered device (PD) 
Circuit protection prevents power interference between 
ports 
Remote power feeding up to 100m 
PoE management features 
- IEEE 802.3af and IEEE 802.3at mode switch control 
- Total PoE power budget control 
- Per port PoE function enable/disable 
- PoE admin-mode control 
- PoE port power feeding priority 
- Per PoE port power limit 
- PD classification detection 
- Temperature threshold control 
- PoE usage threshold control 
- PD alive check 
- PoE schedule 
IP30 aluminum case protection 
DIN rail and wall-mount design 
48VDC, redundant power with polarity reverse protect 
function 
Supports EFT protection of 6000 VDC for power line 
Supports 6000 VDC Ethernet ESD protection 
-40...+75 degrees C operating temperature 
2x Digital Input (DI) 
2x Digital Output (DO) 
Integrate sensors into auto alarm system 
Transfer alarm to IP network via email and SNMP trap 
Prevents packet loss with back pressure (half-duplex) and 
IEEE 802.3x pause frame flow control (full-duplex) 
High performance of Store-and-Forward architecture, and 
runt/CRC filtering eliminates erroneous packets to optimize 
the network bandwidth 
Storm Control support 
- Broadcast/Multicast/Unicast 
Supports VLAN 
- IEEE 802.1Q tagged VLAN 
- Up to 255 VLANs groups, out of 4094 VLAN IDs 
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) 
- Private VLAN Edge (PVE) 
- Protocol-based VLAN 
- MAC-based VLAN 
- Voice VLAN 
Supports Spanning Tree Protocol 
- IEEE 802.1D Spanning Tree Protocol (STP) 
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) 
- IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree
by VLAN (MSTP) 
- BPDU Guard 
Supports Link Aggregation 
- 802.3ad Link Aggregation Control Protocol (LACP) 
- Cisco ether-channel (static trunk) 
- Maximum 5 trunk groups with 8 ports per trunk group 
- Up to 16Gbps bandwidth (duplex mode) 
Provides port mirror (1-to-1) 
Port mirroring to monitor the incoming or outgoing traffic
on a particular port 
Loop protection to avoid broadcast loops 
Supports ERPS (Ethernet Ring Protection Switching) 
Layer 3 IP Routing Features 
- Supports maximum 32 software static routes and route 
summarization 
Ingress Shaper and Egress Rate Limit per port bandwidth 
control 
8x priority queues on all switch ports 
Traffic classification 
- IEEE 802.1p CoS 
- IP TOS/DSCP/IP precedence 
- IP TCP/UDP port number 
- Typical network application 
Strict priority and Weighted Round Robin (WRR) CoS 
policies 
Supports QoS and In/Out bandwidth control on each port 
Traffic-policing policies on the switch port 
DSCP remarking 
Supports IGMP snooping v1, v2 and v3 
Supports MLD snooping v1 and v2 
Querier mode support 
IGMP snooping port filtering 
MLD snooping port filtering 
MVR (Multicast VLAN Registration) 
IEEE 802.1x Port-based/MAC-based network access 
authentication 
Built-in RADIUS client to cooperate with the RADIUS 
servers 
TACACS+ login users access authentication 
RADIUS/TACACS+ users access authentication 
IP-based Access Control List (ACL) 
MAC-based Access Control List 
Source MAC/IP address binding 
DHCP snooping to filter distrusted DHCP messages 
Dynamic ARP Inspection discards ARP packets with invalid 
MAC address to IP address binding 
IP Source Guard prevents IP spoofing attacks 
IP address access management to prevent unauthorized 
intruder 
Switch Management Interfaces 
- Console/Telnet Command Line Interface 
- Web switch management 
- SNMP v1 and v2c switch management 
- SSH/SSL and SNMP v3 secure access 
Four RMON groups (history, statistics, alarms, and events)
IPv6 IP address/NTP/DNS management 
Built-in Trivial File Transfer Protocol (TFTP) client 
BOOTP and DHCP for IP address assignment 
Firmware upload/download via HTTP/TFTP 
DHCP Relay 
DHCP Option 82 
User Privilege levels control 
Network Time Protocol (NTP) 
Link Layer Discovery Protocol (LLDP) 
SFP-DDM (Digital Diagnostic Monitor) 
Cable diagnostic technology provides the mechanism to 
detect and report potential cabling issues 
Reset button for system reboot or reset to factory default
PLANET Smart Discovery Utility for deployment management