8x10/100/1000 PoE+ 2xSFP 120W IEEE802.3at Web/SNMP Switch
PLANET TECHNOLOGY

8x10/100/1000 PoE+ 2xSFP 120W IEEE802.3at Web/SNMP Switch

Tuotekoodi: 502770
  • Valmistajan koodi : GS-4210-8P2S
  • EAN : 4711605281140

196,60 €

Hintamme sis. 24% alv
Myös rahoitus
Osamaksusopimukset noin: 19,74 €/kk, kun sopimusaika on 24 kk.
Leasing/vuokraus:6,79 €/kk ALV 0%, kun sopimusaika on 36 kk.
Korissa: 0 kpl

Saatavuus
Saatavuus
Hyvä
0 kpl voidaan noutaa tai lähettää välittömästi
Saatavuus myymälässä Turku
0 kpl
toimitusaika 6-10 arkipäivää
Saatavuus Verkkokaupassa
2 kpl
toimitusaika 5-10 arkipäivää Keskusvarastolla varastoa
Toimitus ja Palautuskäytännöt
Toimituskulut
Alkaen 8,90 €
Toimitusaika
arvioitu 08.04.2024
Palautuskäytännöt
14 päivää
Tilaa enemmän, halvemmat toimituskulut

Tuotteen kuvaus

  • Valmistajan koodi : GS-4210-8P2S
  • EAN : 4711605281140
  • Tuotteen nimi : 8x10/100/1000 PoE+ 2xSFP 120W IEEE802.3at Web/SNMP Switch

PLANET GS-4210-8P2S on SNMP-hallittava High PoE-kytkin 120W 
virransyöttökapasiteetilla, jonka kaikki 8x 
10/100/1000Base-T porttia ovat PoE+ portteja. Kupariporttien
lisäksi kytkimessä on 2x SFP-porttia (100/1000) 
valokuitumoduleille. 

Tekniset tiedot: 
• 8x 10/100/1000BASE-T Gigabit RJ45 copper ports with 8-port
IEEE 802.3at/af PoE injector 
• 2x 100/1000BASE-X mini-GBIC/SFP slots 

Power over Ethernet 
• Complies with IEEE 802.3at Power over Ethernet Plus, end- 
span PSE 
• Backward compatible with IEEE 802.3af Power over Ethernet 
• Up to 8 ports of IEEE 802.3af / 802.3at devices powered 
• Supports PoE power up to 36 watts for each PoE port 
• Auto detects powered device (PD) 
• Circuit protection prevents power interference between 
ports 
• Remote power feeding up to 100 meters 
• PoE management 
- Total PoE power budget control 
- Per port PoE function enable/disable 
- PoE port power feeding priority 
- Per PoE port power limitation 
- PD classification detection 
- PD alive-check 
- PoE schedule 
Layer 2 Features 
• Prevents packet loss with back pressure (half-duplex) and 
• IEEE 802.3x pause frame flow control (full-duplex) 
• High performance Store and Forward architecture, broadcast
storm control, runt/CRC filtering eliminates erroneous 
packets to optimize the network bandwidth 
• Supports VLAN 
- IEEE 802.1Q tagged VLAN 
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) 
- Protocol VLAN 
- Voice VLAN 
- Private VLAN 
- Management VLAN 
- GVRP 
• Supports Spanning Tree Protocol 
- STP (Spanning Tree Protocol) 
- RSTP (Rapid Spanning Tree Protocol) 
- MSTP (Multiple Spanning Tree Protocol) 
- STP BPDU Guard, BPDU filtering and BPDU forwarding 
• Supports Link Aggregation 
- IEEE 802.3ad Link Aggregation Control Protocol (LACP) 
- Cisco ether-channel (static trunk) 
• Provides port mirror (many-to-1) 
• Loop protection to avoid broadcast loops 

Quality of Service 
• Ingress and egress rate limit per port bandwidth control 
• Storm control support 
- Broadcast / Unknown unicast / Unknown multicast 
• Traffic classification 
- IEEE 802.1p CoS 
- TOS / DSCP / IP precedence of IPv4/IPv6 packets 
• Strict priority and Weighted Round Robin (WRR) CoS 
policies 

Multicast 
• Supports IPv4 IGMP snooping v2 and v3 
• Supports IPv6 MLD snooping v1, v2 
• IGMP querier mode support 
• IGMP snooping port filtering 
• MLD snooping port filtering 

Security 
• Authentication 
- IEEE 802.1X port-based network access authentication 
- Built-in RADIUS client to co-operate with the RADIUS 
servers 
- RADIUS / TACACS+ login user access authentication 
• Access control list 
- IPv4 / IPv6 IP-based ACL 
- MAC-based ACL 
• MAC security 
- Static MAC 
- MAC filtering 
• Port security for source MAC address entries filtering 
• DHCP snooping to filter distrusted DHCP messages 
• Dynamic ARP Inspection discards ARP packets with invalid 
• MAC address to IP address binding 
• IP source guard prevents IP spoofing attacks 
• DoS attack prevention 
• SSH/SSL 

Management 
• IPv4 and IPv6 dual stack management 
• Switch management interface 
- Web switch management 
- Telnet command line interface 
- SNMP v1, v2c and v3 
- SSH and SSL secure access 
• User privilege levels control 
• Built-in Trivial File Transfer Protocol (TFTP) client 
• BOOTP and DHCP for IP address assignment 
• System maintenance 
- Firmware upload/download via HTTP / TFTP 
- Configuration upload / download through web interface 
- Dual images 
- Hardware reset button for system reboot or reset to 
factory default 
• SNTP Network Time Protocol 
• Cable diagnostics 
• Link Layer Discovery Protocol (LLDP) and LLDP-MED 
• SNMP trap for interface link up and link down notification
• Event message logging to remote Syslog server 
• Four RMON groups (history, statistics, alarms and events) 
• PLANET smart discovery utility 
• Smart fan with speed control 

PLANET TECHNOLOGY Takuuaika: 12 kk takuu