Industrial PoE Injector/Extender IP63 2x PoE -40C...+75C
- Valmistajan koodi : IPOE-E202
207,30 €
Leasing/vuokraus:7,16 €/kk ALV 0%, kun sopimusaika on 36 kk.
Tuotteen kuvaus
- Valmistajan koodi : IPOE-E202
- Tuotteen nimi : Industrial PoE Injector/Extender IP63 2x PoE -40C...+75C
PLANET IPOE-E202 on teollisuuskäyttöön suunniteltu
säänkestävä ja laajennetulla käyttölämpötila-alueella
varustettua PoE-injektori/extender. Laite ottaa
käyttöjännitteensä PoE+ sisääntulosta ja pystyy jakamaan sen
joko kahteen 802.3af PoE ulostuloon tai yhteen 802.3at PoE+
ulostuloon.
Katso käsikirjasta tarkemmat tiedot laitteen toiminnasta!
Tuotepakkauksen sisältö: Injektori, 3x säänsuojattua RJ-45
-liitintä, seinäkiinnitystarvikkeet sekä asennusohje
(english).
Tekniset tiedot:
• 3x 10/100/1000BASE-T Gigabit RJ45 interfaces
- 1-port data + power input
- 2-port data + power output
• 1-port data + power input
- Complies with IEEE 802.3at Power over Ethernet Plus end-
span/mid-span PD
• Supports PoE input power up to 30.8 watts
• 2-port data + power output
- Complies with IEEE 802.3af/802.3at Power over
Ethernet/end-span PSE
- Up to 2 IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 25 watts for each PoE port
- Auto detects powered device (PD)
• Extends the range of PoE to an additional 100 meters
(328ft.)
• Forwards both Ethernet data and PoE power to remote device
• Hardware based 10/100Mbps, half/full duplex and 1000Mbps
full duplex mode, flow control, auto-negotiation and auto
MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering
and forwarding rates
• IEEE 802.3x flow control for full duplex operation and
back pressure for half duplex operation
• Integrates address look-up engine, supporting 8K absolute
MAC addresses
• 9K jumbo frame support in 1000Mbps duplex mode
• Automatic address learning and address aging
• Supports CSMA/CD protocol
• IP63-rated aluminum case
• Wall-mount design
• Waterproof and dustproof
• Supports EFT protection of 2000 VDC for power line
• Supports 2000 VDC Ethernet ESD protection
• -40...+75C operating temperature
• No external power cable required for installation
• Plug and Play installation
• IEEE 802.3 10BASE-T
• IEEE 802.3u 100BASE-TX
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3x Flow Control
• IEEE 802.3at Power over Ethernet Plus
• IEEE 802.3af Power over Ethernet