24X 10/100/1000T POE+@4XSFP + 4X 10G SFP+

Layer 3 24-Port 10/100/1000T PoE 802.3at Switch, 4-Port 10G SFP+ Uplinks, stackable Web managed

PLANET SGS-6341-24P4X on hallittava ja pinottava L3-tason
Ethernet-kytkin 24x 10/100/1000 PoE+ kupariportilla, 4x
jaetulla SFP-modulipaikalla sekä 4x 10 Gigasella SFP+
modulipaikalla. Kytkimen tarjoama PoE budjetti on 370W.

Tekniset tiedot:
• 24x 10/100/1000BASE-T Gigabit Ethernet RJ45 with 24-port
IEEE 802.3at/af PoE injector
• 4x 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-
SX/LX/BX SFP
• RJ45 to DB9 console interface for switch basic management
and setup
• Power over Ethernet
- Complies with IEEE 802.3at Power over Ethernet Plus, end-
span PSE
- Backward compatible with IEEE 802.3af Power over Ethernet
- Up to 24 ports of IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 30 watts for each PoE port
- Auto detects powered device (PD)
- Circuit protection prevents power interference between
ports
- Remote power feeding up to 100 meters
• PoE management
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE port power feeding priority
- Per PoE port power limitation
- PD classification detection
- PoE schedule
• IP Stacking
- Connects with stack member via both Gigabit TP and SFP
interfaces
- Single IP address management, supporting up to 24 units
stacked together
• IP Routing Features
- IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3,
BGP4/4+
- Routing interface provides per VLAN routing mode
- VRRPv1/v3 protocol for redundant routing deployment
- Supports route redistribution
• Multicast Routing Features
- Supports PIM-DM (Protocol Independent Multicast - Dense
Mode) and PIM-SM (Protocol Independent Multicast - Sparse
Mode) and PIM-SSM (Protocol Independent Multicast - Source
Specific Multicast)
- Supports DVMRP (Distance Vector Multicast Routing
Protocol)
- Supports IGMP v1/v2/v3 and MLD v1/v2
• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,
IEEE 802.3z Gigabit Ethernet standard
• Supports auto-negotiation and half-duplex/full-duplex
modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
• Auto-MDI/MDI-X detection on each RJ45 port
• Prevents packet loss flow control
- IEEE 802.3x pause frame flow control in full-duplex mode
- Back-pressure flow control in half-duplex mode
• High performance Store-and-Forward architecture, broadcast
storm control, port loopback detect
• 16k MAC address table, automatic source address learning
and aging
• Supports VLAN
- IEEE 802.1Q tag-based VLAN
- GVRP for dynamic VLAN management
- Up to 256 VLANs groups, out of 4041 VLAN IDs
- Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported
- Private VLAN Edge (PVE) supported
- GVRP protocol for Management VLAN
- Protocol-based VLAN
- MAC-based VLAN
- IP subnet VLAN
• Supports Link Aggregation
- Maximum 12 trunk groups, up to 8 ports per trunk group
- IEEE 802.3ad LACP (Link Aggregation Control Protocol)
- Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
- STP, IEEE 802.1D (Classic Spanning Tree Protocol)
- RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
- MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol,
spanning tree by VLAN)
- Supports BPDU & root guard
• Port mirroring to monitor the incoming or outgoing traffic
on a particular port (many to many)
• Provides port mirror (many-to-1)
• Supports G.8032 ERPS (Ethernet Ring Protection Switching)
• Quality of Service
- 8x priority queues on all switch ports
- Support for strict priority and WRR (Weighted Round Robin)
- CoS policies
• Traffic classification
- IEEE 802.1p CoS/ToS
- IPv4/IPv6 DSCP
- Port-based WRR
• Strict priority and WRR CoS policies
• Multicast
- Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1 and
v2 snooping
- Querier mode support
- Supports Multicast VLAN Register (MVR)
• Security
- IEEE 802.1x port-based network access authentication
- MAC-based network access authentication
- Built-in RADIUS client to cooperate with the RADIUS
servers for IPv4 and IPv6
- TACACS+ login users access authentication
- IP-based Access Control List (ACL)
- MAC-based Access Control List
- Supports DHCP snooping
- Supports ARP inspection
- IP Source Guard prevents IP spoofing attacks
- Dynamic ARP Inspection discards ARP packets with invalid
- MAC address to IP address binding
• Management IP for IPv4 and IPv6
• Switch Management Interface
- Console/Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
- SSH/SSL secure access
• BOOTP and DHCP for IP address assignment
• Firmware upload/download via TFTP or HTTP Protocol for
IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
• User privilege levels control
• Syslog server for IPv4 and IPv6
• Supports DDM
• Four RMON groups 1, 2, 3, 9 (history, statistics, alarms
and events)
• Supports sFlow
• Supports ULDP
• Supports ULPP (Uplink Protection Protocol)
• Supports ULSM (Uplink State Monitor protocol)
• Supports LLDP/LLDP MED
• Supports DHCP Option82, Option37/38
• Supports ping, trace route function for IPv4 and IPv6