PLANET 4xGiga UltraPoE 60W +1xGB+ 2xSFP, -40...+75C Industrial Switch SNMP, IP30
- Valmistajan koodi : IGS-5225-4UP1T2S
- EAN : 4711605282444
521,60 €
Leasing/vuokraus:18,02 €/kk ALV 0%, kun sopimusaika on 36 kk.
Tuotteen kuvaus
- Valmistajan koodi : IGS-5225-4UP1T2S
- EAN : 4711605282444
- Tuotteen nimi : PLANET 4xGiga UltraPoE 60W +1xGB+ 2xSFP, -40...+75C Industrial Switch SNMP, IP30
PLANET IGS-5225-4UP1T2S on teollisuuskäyttöön suunniteltu
7-porttinen hallittava DIN-kiskoon asennettava Ultra PoE+
kytkin laajennetulla käyttölämpötila-alueella. L3-kytkin on
varustettu 4x 10/100/1000Base-T Ultra PoE+, 1x 10/100/1000
kupariportilla sekä 2x 100/1000 SFP-portilla.
Tuotteen tekniset tiedot
PLANET IGS-5225-4UP1T2S on teollisuuskäyttöön suunniteltu
7-porttinen hallittava DIN-kiskoon asennettava Ultra PoE+
kytkin laajennetulla käyttölämpötila-alueella. L3-kytkin on
varustettu 4x 10/100/1000Base-T Ultra PoE+, 1x 10/100/1000
kupariportilla sekä 2x 100/1000 SFP-portilla.
Tekniset tiedot
4x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with
Ultra PoE Injector
1x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports ports
2x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto
detection
One RJ45 console interface for basic management and setup
Ultra Power over Ethernet end-span/mid-span PSE
Up to 60 watts of power on 4-pair UTP
Backward compatible with IEEE 802.3at/af PD device
Up to 4 ports of IEEE 802.3af/IEEE 802.3at/Ultra PoE
devices powered
Supports PoE power up to 72 watts for each PoE port
240-watt PoE budget
Auto detects powered device (PD)
Circuit protection prevents power interference between
ports
Remote power feeding up to 100m
PoE management features
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE admin-mode control
- PoE port power feeding priority
- Per PoE port power limit
- PD classification detection
Intelligent PoE features
- Temperature threshold control
- PoE usage threshold control
- PD alive check
- PoE schedule
IP30 aluminum case
DIN rail and wall-mount design
48...56VDC, redundant power with polarity reverse protect
function
Supports 6000V DC Ethernet ESD protection
-40...+75C operating temperature
2x Digital Input (DI)
2x Digital Output (DO)
Integrate sensors into auto alarm system
Transfer alarm to IP network via email and SNMP trap
Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
High performance of Store-and-Forward architecture, and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
Storm Control support
- Broadcast/Multicast/Unicast
Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095 VLAN IDs
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
- BPDU Guard
Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 3 trunk groups with 3 ports per trunk group
- Up to 6Gbps bandwidth (duplex mode)
Provides port mirror (1-to-1)
Port mirroring to monitor the incoming or outgoing traffic
on a particular port
Loop protection to avoid broadcast loops
Supports ERPS (Ethernet Ring Protection Switching)
Supports maximum 32 software static routes and route
summarization
Ingress Shaper and Egress Rate Limit per port bandwidth
control
8x priority queues on all switch ports
Traffic classification
- IEEE 802.1p CoS
- IP TOS/DSCP/IP precedence
- IP TCP/UDP port number
- Typical network application
Strict priority and Weighted Round Robin (WRR) CoS
policies
Supports QoS and In/Out bandwidth control on each port
Traffic-policing policies on the switch port
DSCP remarking
Supports IGMP snooping v1, v2 and v3
Supports MLD snooping v1 and v2
Querier mode support
IGMP snooping port filtering
MLD snooping port filtering
MVR (Multicast VLAN Registration)
IEEE 802.1X Port-based/MAC-based network access
authentication
Built-in RADIUS client to cooperate with the RADIUS
servers
TACACS+ login users access authentication
RADIUS/TACACS+ users access authentication
IP-based Access Control List (ACL)
MAC-based Access Control List
Source MAC/IP address binding
DHCP snooping to filter distrusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
IP Source Guard prevents IP spoofing attacks
IP address access management to prevent unauthorized
intruder
Switch Management Interfaces
- Console/Telnet Command Line Interface
- Web switch management
- SNMP v1 and v2c switch management
- SSH/SSL and SNMP v3 secure access
Four RMON groups (history, statistics, alarms, and events)
IPv6 IP address/NTP/DNS management
Built-in Trivial File Transfer Protocol (TFTP) client
BOOTP and DHCP for IP address assignment
Firmware upload/download via HTTP/TFTP
DHCP Relay
DHCP Option 82
User Privilege levels control
Network Time Protocol (NTP)
Link Layer Discovery Protocol (LLDP)
SFP-DDM (Digital Diagnostic Monitor)
Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
Reset button for system reboot or reset to factory default
PLANET Smart Discovery Utility for deployment management