24-Bit DAC

Audioengine D1 Premium 24-bit DAC

Audioengine D1 Premium 24-bit DAC (digital-to-analog converter) allows you to bypass your computer's soundcard or headphone output and send audio through USB or optical. D1 is the perfect digital interface between your computer and music system and will improve the sound of ALL your music.

Versatile

The D1 accepts inputs from both USB and optical and has outputs for any audio system or headphones. The D1 DAC is the perfect way to get great-sounding music not only from your computer but also from your TV, Apple TV, DVD/BluRay player or CD player. And since it's powered by USB, D1 is also a high-quality portable computer headphone amplifier.

Designed for the Computer Audiophile

D1 will process digital audio at any bit depth up to 24 bits and any sample rate to 192KHz. With it's high signal-to-noise ratio and low distortion the D1 delivers sound quality generally heard only in more expensive DACs. The high-performance headphone output was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiasts.

Easy Setup

Setup is easy and no special software is needed, making D1 a true plug-and-play solution. The D1 outputs connect to any audio system or powered speakers, such as the Audioengine A5+ or A2. Power for the D1 is provided via the USB bus so there is no external power supply to connect.

See and Hear the Difference

Audioengine designers, with their attention to audio quality as well as visual aesthetics, have created a feast for both the eyes and ears. The rounded anodized aluminum case of the D1 reflects traditional Audioengine design and the audio fidelity is typical of Audioengine's commitment to great sound at an affordable price. The Audioengine D1 continues to close the gap between your computer music and home hi-fi and even if you're not an audio enthusiast we guarantee your music will sound better!

DAC type

USB and Optical

Inputs

USB audio
SPDIF Optical

D/A converter

AKM4396

USB transfer mode

Asynchronous dual clock

USB controller

TI1020B

USB device class

Type 1.1 or above

Input bit depth

16 bit, 24 bit

Input sample rate (USB)

32kHz-96kHz native playback
188.2kHz & 192kHz re-sampled to 96kHz

Input sample rate (optical)

32kHz-192kHz native playback

Outputs

Analog RCA L/R stereo
Analog 3.5mm mini-jack stereo

Full-scale output level

2.0V RMS

Output impedance

2 ohms

Recommended headphone impedance range

10 ohms to 10K ohms

Headphone amplifier

OPA2134

Optical receiver

CS8416

Frequency response

10Hz-25KHz (+/- 0.5dB)

SNR

(DC to 20 kHz) >110dB

THD+N

(1kHz FS 96kS/s) <0.0025%

Crosstalk

-85db

Input bit depth

16 bit, 24 bit

Input sample rate (USB)

32kHz-96kHz native playback
188.2kHz & 192kHz re-sampled to 96kHz

Input sample rate (optical)

32kHz-192kHz native playback

Power requirement

USB 5V DC, 200mA

USB power filtering

2-stage redundant regulation

Product dimensions

3.5x3.75x1" (89x95x25mm)

Shipping weight

1.0lbs (0.5kg)

Environmental

Operating Temperature: 32 to 95 degrees F
Non-operating Temp: -4 to 113 degrees F
Relative Humidity: 5% to 95% non-condensing

Included accessories

USB cable, 2ft
Setup guide
Microfiber bag

D1 Internal Converter

The D1 uses the AK4396 DAC, which is well-regarded for its low noise and high fidelity. Due to the high signal-to-noise specs of the AK4396 and the added benefit of double redundancy power source conversion and filtering, the D1 presents impressive low noise and low distortion characteristics. The D1 can process digital audio at any bit depth up to 24-bits and any sample rate up to 192kHz.

D1 Headphone Amplifier

The D1 includes a headphone amp based on the TI OPA2134 low noise opamp. The high-performance headphone output was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiasts.

D1 Power

The D1 is powered directly from the USB bus and power is passed through two stages of regulation to ensure no USB bus power variations affect the audio quality.

D1 Volume Control

Volume is controlled directly from the D1 front panel via the digitally-controlled analog potentiometer.