PLANET MGSW-2416F on 24-porttinen SNMP-hallittava ja pinottava kuitukytkin, jossa on 16x SFP-modulipaikkaa sekä 8x Gigabitin kupariporttia. Kytkin on varustettu varmennetulla virtalähteellä.

PLANET MGSW-2416F on 24-porttinen SNMP-hallittava ja
pinottava kuitukytkin, jossa on 16x SFP-modulipaikkaa sekä
8x Gigabitin kupariporttia. Kytkin on varustettu
varmennetulla virtalähteellä.

Tekniset tiedot:
• 16x 100/1000BASE-X mini-GBIC/SFP slots
• 8x 10/100/1000BASE-T RJ45 copper ports
• RJ45 to RS232 DB9 console interface for basic management
and setup
• 36 to 60V DC, redundant power with polarity reverse
protect function
• 0 to 60 degrees C operating temperature
• 19" rack-mountable
• Relay alarm for port breakdown, power failure
• Two built-in thermal fans
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture, and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
• Storm control support
- Broadcast / Unicast / Unknown unicast
• Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4095 VLAN IDs
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- IP subnet-based VLAN
- Voice VLAN
• Supports Spanning Tree Protocol
- STP, IEEE 802.1D Spanning Tree Protocol
- RSTP, IEEE 802.1w
• Rapid Spanning Tree Protocol
- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol,
spanning tree by VLAN
- BPDU Guard
• Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 24 trunk groups, with 8 ports for each trunk
- Up to 16Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
Port mirroring monitors the incoming or outgoing traffic on
a particular port
• Loop protection to avoid broadcast loops
• L3: Supports maximum 32 static routes and route
summarization
• Ingress shaper and egress rate limit per port bandwidth
control
• 8x priority queues on all switch ports
• Traffic classification
- IEEE 802.1p CoS
- ToS / DSCP / IP Precedence of IPv4/IPv6 packets
- IP TCP/UDP port number
- Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Traffic-policing policies on the switch port
• DSCP remarking
• Supports IGMP snooping v1, v2 and v3
• Supports MLD snooping v1 and v2
• Querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering
• MVR (Multicast VLAN Registration)
• Authentication
- IEEE 802.1x port-based / MAC-based network access
authentication
- IEEE 802.1x authentication with guest VLAN
- Built-in RADIUS client to cooperate with the RADIUS
servers
- RADIUS / TACACS+ users access authentication
Access Control List
- IP-based Access Control List (ACL)
- MAC-based Access Control List (ACL)
• Source MAC / IP address binding
• DHCP Snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
- Console / Telnet command line interface
- Web switch management- SNMP v1, v2c, and v3 switch
management
- SSH / SSL secure access
• IPv6 address / NTP management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
- Firmware upload / download via HTTP / TFTP
- Reset button for system reboot or reset to factory
default
- Dual images
• DHCP relay and option 82
• User privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network diagnostic
- SFP-DDM (Digital Diagnostic Monitor)
- Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
- ICMPv6 / ICMPv4 remote ping
• SMTP / Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMP trap for interface link up and link down notification
• System Log
• PLANET Smart Discovery Utility for deploy management
• 100...240VAC / 36...60VDC dual power redundancy
• Active-active redundant power failure protection
• Backup of catastrophic power failure on one supply
• Fault tolerance and resilience
• 2x Digital Input (DI)
• 2x Digital Output (DO)
• Integrates sensors into auto alarm system
• Transfers alarm to IP network via email and SNMP trap